Troy-bilt 5521 Manual do Utilizador

Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • WarrantyWarning: This unit is equipped with an i

10WARNING: Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.WARNING: NEVER attempt to make any adjustmen

11Before servicing, repairing, or inspect-ing, disengage the control bail and stop engine. Wait until all moving parts have come to a complete stop. D

124. Remove the spark plug and pour one (1) ounce of engine oil through the spark plug hole into the cylinder. Cover spark plug hole with a rag and c

138Trouble- ShootingEngine runs erraticEngine overheatsLoss of powerExcessive vibrationUnit fails to self-propel Augers continue to rotate1. Unit run

14Model 552118175573239402324113134719213541222893129302944543363329384827811227444934504625615263720510169

159Part List: Snow ThrowerFor parts and/or accessories please call 1-866-840-6483, or 1-330-558-7220. www.troybilt.comREF NO.PART No. DESCRIPTION Qty.

169Part List: Snow ThrowerModel 5521For parts and/or accessories please call 1-866-840-6483, or 1-330-558-7220. www.troybilt.com1728283029313230128341

179Part List: Snow ThrowerFor parts and/or accessories please call 1-866-840-6483, or 1-330-558-7220. www.troybilt.comNOTE: For painted parts, please

1810Accessories & KitsMODEL DESCRIPTIONOEM-390-986 Electric Start Kit (fits models with a four-cycle Tecumseh 4 HP or 5 HP engine)OEM-737-0209 MT

1911NOTES:Use this page to make notes and write down important information.For parts and/or accessories please call 1-866-840-6483, or 1-330-558-7220.

2Please do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support.Customer SupportIf you have diffi

The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its posses-sio

31Safety LabelsWARNINGThis symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property

42Safe Operation PracticesTraining1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble

5Operation1. Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with the rotating parts can amput

6NOTE: This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to

74Know Your Snow ThrowerChoke Lever Activating choke control closes the choke plate on carburetor and aids in starting engine. Refer to the engine man

8Before Starting WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.IMPORTANT: Fo

9Operating Tips1. Discharge snow downwind whenever possible. Slightly overlap each previously cleared path.2. Lifting up on the handle will allow th